机床刀具钨钢合金回收

热线电话(微信同号)

15552518465

新闻资讯

News & Trends

联系我们

CONTACT US

名称:骏豪数控刀具

地址:济南市槐荫区营市西街

电话:15552518465(微信同号)

Q Q:547250371

邮箱:yangcunbo-1986@163.com

联系人:杨经理

回收刀具回收实现资源在此利用!

发布时间:2021-03-29 16:46:14 来源:http://www.jnskdj.com 作者:骏豪 浏览量:

工业化的发展使得越来越多的机械设备投入使用,但随着使用年限的增长,很多产品被闲置,也就成为没有用的东西。特别是机床的使用中,经常会替换下来一些零件、刀具之类的,这些东西一般情况下都会被当作垃圾处理掉了。

With the development of industrialization, more and more machinery and equipment are put into use, but with the growth of service life, many products are idle and become useless. Especially in the use of machine tools, some parts and cutting tools are often replaced, which are usually treated as garbage.

这样一来,就造成大量资源的浪费,对于经济发展是极为不利的。所以当数控刀具刀片回收行业出现的时候,这一切问题都得到有用的解决。

In this way, a lot of resources will be wasted, which is extremely unfavorable for economic development. So when the NC tool blade recycling industry appears, all these problems have been solved.

数控刀具刀片回收实现资源在此利用!(图1)

数控所用的刀具刀片类,与传统中普通意义上的刀具、刀片不同,它是有着一定的规格的,无论是长短尺寸来说,还是应用的位置说,它都是不一样的。再者,机床的规格不一样,所需要的刀具刀片也是不一样的。

The cutter and blade used in numerical control is different from the traditional common sense cutter and blade. It has a certain specification. It is not the same in terms of length, size and application position. Moreover, the specifications of machine tools are not the same, the required tool blades are not the same.

从某种意义上来说,这类产品如果得不到妥善的处理,那么就只能当作垃圾来扔掉,这样就会造成大量资源的浪费。而数控刀具刀片回收则是根据这一特殊情况衍生出来的行业,更是一种全新的行业,它的出现不仅可以使得资源回收,而且还可以实现其再利用,是非常难得的好项目。

In a sense, if such products are not properly treated, they can only be thrown away as garbage, which will cause a lot of waste of resources. The recycling of NC cutter blades is a new industry derived from this special situation. It can not only recycle resources, but also reuse them. It is a very rare good project.

数控刀具刀片回收虽然看起来简单,其实不然,在回收之后,要对不同的刀具刀片等进行分类、检验,看哪些是可以直接使用的,哪些是需要重新制作的。只有非常明确每一件产品的性能及现状,才能够更好的对其重新再利用。不管怎么说,数控刀具刀片回收都是一件非常好的事情,值得大家关注。

Although the recycling of NC cutting tools and blades seems simple, it is not. After recycling, different cutting tools and blades should be classified and inspected to see which ones can be used directly and which ones need to be remade. Only when the performance and status of each product are very clear, can it be better reused. In any case, NC tool blade recycling is a very good thing, worthy of our attention.