机床刀具钨钢合金回收

热线电话(微信同号)

15552518465

新闻资讯

News & Trends

联系我们

CONTACT US

名称:骏豪数控刀具

地址:济南市槐荫区营市西街

电话:15552518465(微信同号)

Q Q:547250371

邮箱:yangcunbo-1986@163.com

联系人:杨经理

刀头刀粒的出现让加工行业更有价值!

发布时间:2021-03-29 16:54:40 来源:http://www.jnskdj.com 作者:骏豪 浏览量:

如今,我们对于每一种不同的数控行业的不断发展都促使了我们对于很多科学技术的应用的提高,如今,数控刀头刀粒的使用多。刀头刀粒回收的使用主要就是在我们的数控行业当中使用的比较广泛,刀头刀粒的出现是为了让我们的数控行业可以更好的切削和制作工件的一种重要的存在。

Nowadays, the continuous development of each different numerical control industry has prompted us to improve the application of science and technology. Nowadays, the use of numerical control cutter head and blade is more. The use of cutter head and grain recycling is widely used in our numerical control industry. The emergence of cutter head and grain is an important existence for our numerical control industry to better cut and produce workpieces.

对于我们的刀头刀粒来说,由于本身的切削力大,切削温度高。该类型材料强度大,切削时切向应力大、塑性变形大,因而切削力大。再加上材料有很差的导热性造成了温度升高。

For our cutter head, the cutting temperature is high because of its large cutting force. This type of material has high strength, large tangential stress and plastic deformation during cutting, so the cutting force is large. In addition, the poor thermal conductivity of the material causes the temperature rise.

刀头刀粒的出现让加工行业更有价值!(图1)

而高温机床更是必然会造成刀具磨损的加快。而且,高温合金不锈钢均为奥氏体组织,切削时加工硬化倾向大,和普通碳素钢相比,这种切削方式为碳素钢的数倍,会缩短刀具寿命。

The high temperature machine tool is bound to accelerate the tool wear. Moreover, high temperature alloy stainless steel is austenite structure, so it tends to work hardening when cutting. Compared with ordinary carbon steel, this cutting method is several times of carbon steel, which will shorten tool life.

如果想要更好的使用好我们的数控刀头刀粒回收我们就必然需要有更好的方式将我们的刀头刀粒进行一定的保养。在使用数控机床的时候就需要特别的注意,我们都知道,数控冲床受刀具方面的影响,对于一些异形工件和不规则孔的加工,在边缘会出现较大的毛刺,要进行后期去毛刺的处理,否则会影响工件的精度这也是为什么我们的数控机床在使用刀头刀粒的时候会如此的小心的一个重要的原因。

If we want to make better use of our CNC cutter head and grain recycling, we must have a better way to maintain our cutter head and grain. When using CNC machine tools, we need to pay special attention. We all know that CNC punching machine tools are affected by cutting tools. For the processing of some special-shaped workpieces and irregular holes, there will be large burr on the edge. We need to carry out later deburring treatment, otherwise it will affect the accuracy of the workpieces. This is why our CNC machine tools will do so when using cutter head and cutter grain An important reason to be careful.

因为一个不小心,一个保养不好我们的数控刀头刀粒就会因此而发生卷边的问题,数控刀头刀粒的使用虽然很有价值,但是数控刀头刀粒本身也是很“脆弱”的,保护好它很关键哦。

Because one is not careful and one is not well maintained, our CNC cutter head and blade will have curling problems. Although the use of CNC cutter head and blade is very valuable, the CNC cutter head and blade itself is also very "fragile". It is very important to protect it.