机床刀具钨钢合金回收

热线电话(微信同号)

15552518465

新闻资讯

News & Trends

联系我们

CONTACT US

名称:骏豪数控刀具

地址:济南市槐荫区营市西街

电话:15552518465(微信同号)

Q Q:547250371

邮箱:yangcunbo-1986@163.com

联系人:杨经理

UGNX绘制数控加工的铣刀回收类型

发布时间:2021-07-08 15:21:47 来源:http://www.jnskdj.com 作者:骏豪 浏览量:

1、按材质分:

1. By material:

白钢刀:易磨损,用于铜公及小钢料开粗。

White steel knife: easy to wear, used for roughening copper and small steel.

钨钢刀:用于清角(特别是钢料)及光刀。

Tungsten steel knife: used for angle cleaning (especially steel material) and light knife.

合金刀:类似于钨钢刀。

Alloy knife: similar to tungsten steel knife.

紫刀:用于高速切削,不易磨损。

Purple knife: used for high speed cutting, not easy to wear.

2、按刀头分:

2. According to the cutter head:

平底刀:用于平面及直身侧面,清平面角。

Flat bottom knife: used for plane and straight side, clear plane angle.

UGNX绘制数控加工的铣刀回收类型(图1)

球刀:用于各种曲面中光、光刀。

Ball knife: used for all kinds of surface medium light and light knife.

牛鼻刀(有单边、双边及五边):用于钢料开粗(R0.8、R0.3、R0.5、R0.4)。

Ox nose knife (one side, two sides and five sides): used for roughening steel (r0.8, r0.3, r0.5, r0.4).

粗皮刀:用于开粗,注意余量的留法(0.3)。

Rough leather knife: used to cut rough, pay attention to the remaining method (0.3).

3、按刀杆分:

3. By arbor:

直杆刀:直杆刀适用各种场合。

Straight bar cutter: straight bar cutter is suitable for various occasions.

斜杆刀:但不适用于直身面及斜度小于杆斜度的面。

Slant bar knife: but it is not suitable for straight face and face whose slope is less than that of the bar.

4、按刀刃分:

4. By blade:

两刃、三刃、四刃,刃数越多,效果越好,但做功越多,转速及进给相应调整,刃数多寿命长。

The more the number of blades, the better the effect, but the more the work, the more the speed and feed are adjusted, the more the number of blades and the longer the service life.