欢迎访问骏豪数控刀具网站!

热线电话(微信同号)

15552518465

公司动态

联系我们

CONTACT US

名称:骏豪数控刀具

地址:济南市槐荫区营市西街

电话:15552518465(微信同号)

Q Q:547250371

邮箱:yangcunbo-1986@163.com

联系人:杨经理

公司动态 所在位置: 首页-新闻资讯-公司动态-如何对有价物质进行回收和冶炼?

如何对有价物质进行回收和冶炼?

发布时间:2021-10-09 来源:http://www.jnskdj.com/ 作者:guanli

在我们对数控刀具回收之后,回收的产品当中存在的有价物质是我们处理的重点之一。下面是对回收和冶炼方法的介绍。为您讲解数控刀具刀片回收之后该如何对有价物质进行回收和冶炼。
After we recycle the NC cutting tools, the valuable substances in the recycled products are one of our priorities. The following is an introduction to recovery and smelting methods. Explain to you how to recover and smelt valuable substances after the recovery of NC tool blades.
首先,我们可以采用硝石的方法来对有价物质进行回收和冶炼。将硝石以及回收来的数控刀具放置在九百摄氏度到一千二百摄氏度的环境当中进行熔融,并且还需要采用水浸的方法进行提炼。通过这种方法能够让刀具当中的APT以及其他物质进行提炼,而钴这种成分能够被收集之后在经过渣滓处理的过程中进行回收。
First, we can use the method of saltpeter to recover and smelt valuable substances. The nitrate and the recovered NC cutting tools are melted in the environment of 900 ℃ to 1200 ℃, and the water immersion method is also needed for refining. In this way, apt and other substances in the cutting tools can be refined, and cobalt can be collected and recycled in the process of waste treatment.
这种方法的优点就是它的应用是非常早的,而且给我们带来的适应性也非常的广泛。在投资的过程中所耗费的资金比较少,但是能够在快时间当中提炼出物质,但是它的缺点就是本身的流程还是比较长的,并且回收率也比较低。能够给我们带来较高的成本,对于周围的环境带来的污染性也是存在的。
The advantage of this method is that its application is very early, and it brings us a wide range of adaptability. The investment process costs less money, but it can extract materials in a fast time, but its disadvantage is that its own process is still relatively long and the recovery rate is relatively low. It can bring us high cost and pollution to the surrounding environment.
其次,机械破损的方法也能够帮助到我们。这种方法方法主要是通过机械的破损以及球磨工作之后进行处理的。它的工艺流程比较短,并且生产的成本也比较低。给我们带来的工作效率比较高,同时消耗过程中成本也是比较低的。不过存在的缺点就是需要我们来通过专门的技巧而达到冶炼和回收的效果,如果缺乏相关的设备也不能够成功进行数控刀具回收。
Secondly, the method of mechanical damage can also help us. This method is mainly through mechanical damage and after ball milling. Its technological process is relatively short, and the production cost is also relatively low. The work efficiency brought to us is relatively high, and the cost in the consumption process is also relatively low. However, the disadvantage is that we need special skills to achieve the effect of smelting and recycling. If we lack relevant equipment, we can not successfully recycle NC tools.
不同的制作方法给我们带来的作用程度也是不一样的数控刀具刀片回收,我们可以根据产品的具体情况来进行不同方法的采用。
Different manufacturing methods have different effects on us. For the recovery of NC tool blades, we can adopt different methods according to the specific situation of the product.